12 2551 Magmeter
7.3 Calibration Data: K-Factors
7.2 Bi-Directional Flow
• The 2551 magmeter is designed to measure bi-directional ow.
• The forward ow direction is indicated by the directional arrow molded into the side of the 2551 sensor.
• The conduit ports are assembled at the factory to point UPSTREAM. They may be reversed by
disassembling the components of the magmeter and reassembling.
Flow Rate Display: The "+" sign is suppressed during forward ow.
"-123.45 GPM" during reverse ow.
Totalizer Display: The totalizer will count during forward ow conditions only.
During reverse ow the totalizer will not increment.
Relay Outputs: May be set to detect reverse ow: "Low Setpoint at -25 GPM."
4 to 20 mA output: May be scaled to span any ow range:
For example: "4 to 20 mA = -100 GPM to +100 GPM"
Frequency output, Frequency ÷ 10 output: Reverse ow is processed same as forward ow in the frequency output magmeters.
Digital (S
3
L) output: Reverse ow results in 0 ow rate output.
Flow
PVC Tees and Clamp-on Saddles
Pipe Size
(In.)
Fitting
Type
K-Factor
Gallons
K-Factor
Liters
SCH 80 PVC-U TEES FOR SCH 80 PIPE
½ MPV8T005 2277.0 601.58
¾ MPV8T007 1407.6 371.90
1 MPV8T010 861.17 227.52
1¼ MPV8T012 464.91 122.83
1½ MPV8T015 331.43 87.56
2 MPV8T020 192.89 50.96
SCH 80 PVC TEES FOR SCH 80 PIPE
2½ PV8T025 131.46 34.73
3 PV8T030 82.52 21.80
4 PV8T040 44.78 11.83
SCH 80 CPVC TEES FOR SCH 80 PIPE
½ MCPV8T005 2277.0 601.58
¾ MCPV8T007 1407.6 371.90
1 MCPV8T010 861.17 227.52
1¼ MCPV8T012 464.91 122.83
1½ MCPV8T015 331.43 87.56
2 MCPV8T020 192.89 50.96
SCH 80 PVC CLAMP-ON SADDLES FOR SCH 80 PIPE
2 PV8S020 193.83 51.21
2½ PV8S025 138.01 36.46
3 PV8S030 83.89 22.16
4 PV8S040 40.88 10.80
6 PV8S060 22.53 5.95
8 PV8S080 12.52 3.31
10 PV8S100 7.94 2.10
12 PV8S120 5.71 1.51
SCH 80 PVC CLAMP-ON SADDLES FOR SCH 40 PIPE
2 PV8S020 180.01 47.56
2½ PV8S025 123.72 32.69
3 PV8S030 75.81 20.03
4 PV8S040 41.87 11.06
6 PV8S060 19.71 5.21
8 PV8S080 11.73 3.10
10 PV8S100 7.43 1.96
12 PV8S120 5.23 1.38
Polypropylene True Union Tees and Wafers
PVDF True Union Tees
PVC True Union Tees
Pipe Size
(Metric)
Fitting
Type
K-Factor
Gallons
K-Factor
Liters
POLYPROPYLENE FITTINGS (DIN/ISO, BS, ANSI)
DN15 PPMT005 2192.73 579.32
DN20 PPMT007 1327.81 350.81
DN25 PPMT010 737.16 194.76
DN32 PPMT012 453.46 119.81
DN40 PPMT015 275.03 72.66
DN50 PPMT020 164.17 43.35
PVDF FITTINGS (DIN/ISO, BS, ANSI)
DN15 SFMT005 1946.49 514.26
DN20 SFMT007 1158.05 305.96
DN25 SFMT010 749.09 197.91
DN32 SFMT012 439.51 116.12
DN40 SFMT015 248.93 65.77
DN50 SFMT020 146.85 38.80
PVC FITTINGS (DIN/ISO, BS, ANSI)
DN15 PVMT005 2067.76 546.30
DN20 PVMT007 1136.61 300.29
DN25 PVMT010 716.52 189.31
DN32 PVMT012 446.07 117.85
DN40 PVMT015 278.83 73.67
DN50 PVMT020 159.36 42.10
Commentaires sur ces manuels