Gf-signet 2610 Process Optical Dissolved Oxygen Sensor Manuel d'utilisateur

Signet 2610 Process Optical Dissolved Oxygen Sensor3-2610.090 Rev. C 08/13*3-2610.090*EnglishOperator's ManualYour new RDO® Pro is a rugged

102610 DO SensorNotes

112610 DO SensorSpecifi cationsGeneralSensor type: ...Luminescent dissolved oxygen sensorTransmitter/local display: .

Ordering Information2610 Optical DO SensorMfr. Part No Code Description3-2610-31 159 001 753 Optical DO Sensor (0-20 ppm) with Modbus, SDI, an

22610 DO SensorIntroductionUnpacking the Sensor1. Remove the RDO® sensor from the box and other packaging materials.2. Unscrew the nose cone from t

32610 DO SensorSensor DeploymentSensor DeploymentThe cable end of the RDO® Pro is internally threaded (1¼ - 11½ NPT) and can be attached to a external

42610 DO SensorCare and MaintenanceSensor Cap ReplacementReplace the Sensor CapThe sensor cap has a 1-year life after the instrument takes its fi rst r

52610 DO SensorWiring and Set Up3-2610-31 to 8900 Set Up1. Connect the 8058, 2610-31, and 8900 as shown in the diagram.2. Press and hold ENTER key f

62610 DO Sensor1. Connect the 3-2610-41, and 8900 as shown in the diagramNOTE: The wiring of the 3-2610-41 is non-standard:• Red wire is connected t

72610 DO Sensor3-2610-31 to 9900 Set Up1. Wire the 9900, 2610-31, and 8058 as shown in the diagrams.2. On the 9900 press and hold the ENTER key for

82610 DO Sensor1. Wire the 9900 and 3-2610-41 as shown in the diagram.NOTE: The wiring of the 3-2610-41 is nonstandard:• 3-2610-41 Red wire is conne

92610 DO SensorWiring and Set Up3-2610 to 4 to 20 mA Set Up3-2610 to Modbus Set UpRedBlackBlueGreenBrownWhite+ModbusRS485–ModbusRS485 3-2610-31or 3-26